Chief PDR2243B Manuel d'installation télécharger pdf (Page 11)

Installation Instructions PDR Series

Removing Display from Mount

1. Remove bolt or padlock from faceplate (if used).

NOTE: The pin may have been used as a more permanent

locking device. If so, remove nut and pin and move

from the lower holes to the upper holes.

2. Pull back on flag on upper mounting hole and press pin

down into "Open" position. (See Figure 16)

WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40

LBS! Always use two people and proper lifting techniques

when installing or positioning display on mount.

3. Carefully lift display from mount.

4. Lift up on pin and place flag back against faceplate to return

it to "Closed" position.

Figure 16

Remove bolt

or padlock

if used

Pin in

"Open"

position -

Pin in

"Closed"

position -

move to

"Open"

position to

move to

"Closed"

position

remove

display

after display

is removed.

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Chief PDR2243B Manuel d'installation Page 11