Chief SSC4 Manuel d'installation télécharger pdf (Page 2)

4. Place an SSC-3 bracket on one of the mounting points of the SLB interface bracket (see Figure 6).

Depending on the screw size, a flat washer (provided) may be necessary.

5. Install the projector on the RPA ceiling mount.

6. Install the final SSC-1 bracket and 10-24 x .25” screw (provided) into the hole from Step #1 (see

Figure 7).

7. Install locking device in each of the SSC brackets or connect all five by a cable, making sure the head

of each screw is covered (see Figure 8).

Figure 4.

ure 5.

Figure 6.

Figure 7.

Figure 8.

1 2

Pas de commentaire

Chief SSC4 Manuel d'installation Page 2