Chief PACPC1 Manuel d'utilisateur télécharger pdf (Page 6)

PACPC1 Installation Instructions

Installing Conditioner

1. Insert conditioner slots onto Phillips screws in bracket.

(See Figure 5)

2. Slide conditioner left or right. (See Figure 5)

3. Remove conditioner to adjust Phillips screws in bracket as

necessary for desired tension in mount.

Figure 5

4. OPTIONAL: For additional security, insert and tighten one

8-32 x 3/8" buttonhead security screw (J) through the

bracket into the conditioner. (See Figure 6)

NOTE:

Use optional security screw in pole mount application

only.

Figure 6

(Pole mount shown)

Conditioner

Bracket

Screws (x 2)

Conditioner

Slots

(J) x 1

Conditioner

(Horizontal Attachment Shown)

1 2 3 4 5 6 7 8

Pas de commentaire

Chief PACPC1 Manuel d'utilisateur Page 6