Chief PDC2000B Manuel d'installation télécharger pdf (Page 7)

Installation Instructions PDC Series

Adjustments

Roll Adjustment

1. Loosen two Nylock nuts inside the PDC. (See Figure 5)

2. Using the slotted holes, adjust the roll, or horizontal

movement.

3. Tighten two Nylock nuts.

Figure 5

Pitch Adjustment

4. Loosen two screws on side of PDC. (See Figure 5)

5. Adjust to desired pitch, or vertical movement.

6. Tighten the screws on side of PDC.

x 2

(Display and faceplate

removed for clarity)

1 2 3 4 5 6 7 8

Pas de commentaire

Chief PDC2000B Manuel d'installation Page 7